By default, each LED panel will show the top left portion of an image signal it receives. This is defined as the default starting coordinate (0,0).
Because LED screens use modular panels, they will require configuration upon setup. The configuration sets how many panels there are across and down, the number of pixels, the number of panels per data cable, and the direction the cable(s) are connected.
The configuration process can be done in two ways (click the hyperlinks for specific instructions):
- Configuration via Software on the Control Computer.
- Configuration via the processor/controllers onboard interface (on select models)
Once the configuration is complete and the scaling is set, you will have a uniform full-screen image.